TM 10-4320-344-24
2.21.15 Generator Capacitor Replacement, Model 609-C.
This task covers:
2.21.15.1 Removal
2 .
2
1 .1 5 . 2 I n s t a l l a t i on
INITIAL SETUP
Tools
General Mechanic’s Automotive
Equipment Conditions (Continued)
Tool Kit, Appendix B, Section
V-Belt Guard removed, paragraph 2.12.15.
III, Item 1
General Safetv Instructions
Materials/Parts
Do not work on equipment that is not
Lock Washers (TM 10-4320-303-24P)
securely stabilized to prevent rolling
o r s l i d i n g.
Equipment Conditions
Do not work on equipment with battery
Pumping station shut down, TM 10-4320-
344-10.
connected. Electrocution hazard is
present if battery is connected.
Battery disconnected, paragraph 2.15.3
Do not work on equipment without follow-
ing standard shop safety practices.
2.21.15.1 Removal,
a.
Open left side engine access door (Figure 2-129, 1) on pumping assembly (2).
Do not work on equipment with battery connected.
Electrocution hazard is
present if battery is connected.
Failure to obey this warning may result in
serious personal injury or death.
b .
Remove two nuts (3), lock washers (4), and generator capacitor (5) from
a l t e r n a t o r ( 6 ).
Discard lock washers (4).
2.21.15.2 Installation.
a.
Mount generator capacitor (5) on alternator (6) and secure with two new lock
washers (4) and nuts (3).
b .
Close left side engine access door (1) on pumping assembly (2).
2-296
