TM 10-4320-344-24
2.21.13 Alternator Belt Maintenance.
This task covers:
2.21.13.1 Adjust
2.21.13.3 Installation
2.21.13.2 Removal
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section
III, Item 1
Equipment Conditions
Pumping station shut down, TM 10-4320-
344-10.
Left Side Panel open (Model 609-A).
Equipment Conditions
(Continued)
V-Belts removed, paragraph 2.21.12 (609-C
and US636HCCD-1).
General Safety Instructions
Do not work on equipment that is not
securely stabilized to prevent rolling
o r s l i d i n g.
Do not work on equipment without follow-
ing standard shop safety practices.
This procedure applies to Model 609-A. The procedures for models 609-C and
US636HCCD-1 are similar.
2.21.13.1 Adjust.
Figure 2-127.
Alternator Belt
a .
Loosen hinge screw (Figure 2-127, 1) on
Maintenance, Model 609-A.
alternator mounting bracket (2).
2-292
NOTE
