TM 10-4320-344-24
Figure 2-128.
Alternator Cover Maintenance, Model US636HCCD-1.
b.
Install three resilient mounts (8) and secure with three nuts (7).
c .
Install grommet (6) in alternator cover (3).
2.21.14.5 Installation.
When installing alternator cover on retainer bracket do not allow alternator
cover to rest on alternator wires.
Ensure alternator wires are not caught on
alternator cover.
Failure to obey this caution may result in damage to
equipment.
a .
Insert three alternator wires (5) through grommet (6) in alternator cover (3).
Refer to tags and connect alternator wires (5).
Remove and discard tags.
b .
Position alternator cover (3) against resilient mounts (8) and secure with
three flat washers (2) and screws (1).
2-295
