b.
Loosen bolt (3) in alternator adjusting arm (4).
There should be approximately 1/2 inch deflection at center of alternator
b e l t .
c .
Slide alternator (5) away from water pump assembly (6) to apply tension to
a l t e r n a t o r b e l t ( 7 ) .
d.
Tighten bolt (3) and hinge bolt (1).
2.21.13.2 Removal.
a.
Loosen hinge screw (1) on alternator mounting bracket (2).
b.
Loosen belt (3) in alternator adjusting arm (4).
c .
Slide alternator (5) towards water pump assembly (6).
d.
Remove alternator belt (7) from pulley on alternator (5), water pump assembly
pulley (8), and crankshaft pulley (9).
e .
Slip alternator belt (7) over fan (10) and remove.
2.21.13.3 Installation.
a .
Place alternator belt (7) over fan (10).
b .
Place alternator belt (7) on crankshaft pulley (9), water pump assembly pulley
(8), and pulley on alternator (5).
c .
Adjust alternator belt (7) tension.
2-293
TM 10-4320-344-24
NOTE