Figure 2-125. V-Belt Guard Maintenance, Model US636HCCD-1.

2.21.11 V-Belt Guard and Mounting Supports Maintenance, Model US636HCCD-1.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
299

TM 10-4320-344-24 2.21.11 V-Belt Cover Assembly and Mounting Supports Maintenance, Model US636HCCD-1. (Continued) Figure 2-125. V-Belt Guard Maintenance, Model US636HCCD-1. 2.21.11.5 Installation. a . Position retainer (31) against engine mounting support and secure with two flat washers (30), new lock washers (29), and screws (28). b. Install flat washer (27) and bushing (26) on retainer (31). c . Install flat washer (24), spacer (23), stud (22), flat washer (21), and bushing (20) on retainer bracket (25). d. Install stud (18), flat washer (17), spacer (16), and bushing (15) on cooling air blower (19). e . Install three flat washers (14], cover plate (9), flat washer (13), stud (12), flat washer (11), and bushing (10) on engine. f . Position retainer bracket (7) against cover plate (9) and secure with two b o l t s ( 8 ). g . Position bushing (6) on retainer bracket (7) and secure with flat washer (5) and bolt (4). 2-288

Privacy Statement
Press Release
Contact