2.21.16 Alternator Maintenance. (Continued)b .Remove screw (4), lock washer (5), and flat washer (6) from adiusting arm (7)and swing alternator (8) out from engine. Discard lock washer (5).c .Remove nut (9), washer (10), and tag and remove wire (11) from alternator (8).d .Unclip diode connector (12).To prevent alternator damage, be sure to support it while removing bolt.e .Remove nut (1), lock washer (13), screw (2), and alternator (8) fromalternator mounting bracket (3).Discard lock washer (13).2.21.16.4 Installation.Hand-tighten nut to allow for alternator belt adjustment.a.Position alternator (8) in mounting bracket (3) and secure with screw (2), newlock washer (13), and nut (1).b .Connect diode connector (12).c .Refer to tag, Install wire (11) on alternator (8) and secure with washer (10)and nut (9).Remove and discard tag.Hand-tighten bolt to allow for alternator belt adjustment.d .Swing alternator (8) towards engine and secure to alternator adjusting arm (7)with flat washer (6), new lock washer (5), and screw (4).e .Adjust alternator belt.2-300TM 10-4320-344-24NOTENOTE
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business