b.
c .
d .
e .
f .
g .
TM 10-4320-344-24
Remove grommet (3) from rear panel plate (2) and slide along and remove from
engine wiring harness (4).
Remove nuts (5), bolts (6), and lock washers (7) that secure rear panel plate
(2) to rear panel (8).
Discard lock washers (7).
Remove five bolts (9) and lock washers (10) from rear panel plate (2).
Discard lock washers (10).
Slide rear panel plate (2) along engine wiring harness (4) away from rear
panel (8).
Remove engine wiring harness (4) through notch (11) in rear panel plate (2)
and remove rear panel plate (2).
Remove six bolts (12), lock washers (13), and rear panel (8).
Discard lock
washers (13).
2.19.2.2 Repair.
a.
Inspect rear panel plate (2) and rear panel (8) for cracks, holes, and damage.
b.
Inspect all mounting hardware for damage.
c .
Replace all defective components.
2.19.2.3 Installation.
a .
b .
c .
d.
e .
f .
g .
Position rear panel (8) on engine bellhousing and secure
washers (13) and bolts (12).
Install engine wiring harness (4) into rear panel plate
(11).
with six new lock
(2) through notch
Slide rear panel plate (2) along engine wiring harness (4) and position on
rear panel (8).
Secure rear panel plate (2) to rear panel (8) with five new lock washers (10)
and bolts (9).
Install three new lock washers (7), bolts (6), and nuts (5).
Install grommet (3) on engine wiring harness (4) and insert in rear panel
p l a t e ( 2 ).
Install new grommet (1) in rear panel plate (2).
2-243