TM 10-4320-344-24
b .
Remove two screws (5), flat washers (6), and shield assembly (7) from pumping
assembly (8).
c .
Remove screw (9), flat washer (10), and bracket (11) from turbocharger (12).
2.19.3.2 Repair.
a.
Inspect shield assembly (7), bracket (11), and all mounting hardware for
cracks, holes, bends, or damage.
b .
Replace all defective components.
2.19.3.3 Installation.
a.
Position bracket (11) on turbocharger (12) and secure with flat washer (10)
and screw (9).
b.
Position shield assembly (7) on pumping assembly (8) and secure with two flat
washers (6) and screws (5).
c .
Secure bracket (11) to shield assembly (7) with friction receptacle (4), flat
washer (3), new lock washer (2), and screw (1).
2-245
