TM 10-4320-344-24
2.16.33 Process Control Device Maintenance, Unit US636HCCD-1.
This task covers:
2.16.33.1 Removal
2.16.33.3 Test
2.16.33.2 Repair
2.16.33.4 Installation
INITIAL SETUP
Tools
Equipment Conditions
(Continued)
General Mechanic’s Automotive
Battery disconnected, paragraph 2.15.4.
Tool Kit, Appendix B, Section III,
Item 1
Control Panel Cover Assembly removed,
paragraph 2.16.2.
Multimeter, Appendix B, Section III,
Item 2
General Safety Instructions
Material/Parts
Do not work on equipment that is not
securely stabilized to prevent rolling or
10k Resistor, Appendix C, Item 21
s l i d i n g.
Tags, Appendix C, Item 31
Lock Washers (TM 10-4320-344-24P)
Do not work on equipment with battery
connected. Electrocution hazard is
Equipment Conditions
present if battery is connected.
Pumping station shut down, TM 10-4320-
Do not work on equipment without following
standard shop safety precautions.
2.16.33.1 Removal.
Figure 2-88. Process Control Device Maintenance.
2-217
344-10.
