Figure 2-85. Governor Control Module Maintenance.
2.16.32.4 Adjustment.
If control module has been replaced or original module is suspected of being
out of adjustment, adjust as follows:
a.
Open control panel door assembly (Figure 2-86,1) and control panel (2).
b.
Remove and retain four screws (3), two nuts (4), and six lock washers (5).
c .
Remove cover (6) from governor control module (7).
d .
Perform adjustment to governor control module (7) as follows:
2-213
TM 10-4320-344-24
NOTE
