2.16.27 Fuel Rack Cable Replacement, Model 609-A. (Continued)
2.16.27.2 Installation.
NOTE
Ensure that fuel rack handle for fuel rack cable is pushed fully in and turned
clockwise to LOCK position prior to installation.
a.
Insert fuel rack cable (4) through control panel (15) and slide lock washer
(12) and cable mounting nut (11) on fuel rack cable (4).
b.
Insert fuel rack cable (4) through pressure regulator mounting bracket (14)
and grommet in rear panel plate (13) and secure to control panel with lock
washer (12) and cable mounting nut (11).
c .
Secure fuel rack cable (4) to wiring harness (10) with new electrical tiedown
s t r a p s ( 9 ) .
d .
Install cable clamp (8) on fuel rack cable (4) and secure to cable clamp
mounting bracket (16) with clamp mounting bolt (7), lock washer (6) and
nut (5).
With fuel rack handle turned fully in and clockwise to LOCK position, universal
wire stop should be just clear of bracket (so it will not interfere with opera-
t i o n ) .
e .
Install universal wire stop (3) on end of fuel rack cable (4) and secure with
screw (2).
2-200
TM 10-4320-344-24
NOTE
