b .
Secure manual throttle control cable (15) to wiring harness (18) with
electrical tiedown straps (17).
Do not tighten cable clamps until cable has been adjusted.
c .
Install three cable clamps (16) on manual throttle control cable (15).
d .
Install nut (14), two lock washers (12), bracket (13), and pivot leg (10) on
manual throttle control cable (15).
e .
Insert pivot leg (10) through inboard throttle arm (11) and secure with lock
washer (9) and nut (8).
f .
Insert manual throttle control knob assembly (1) through front of control
panel (7) and secure with lock washer (6) and backing nut (5).
g.
Install cable connector (3) on manual throttle control knob assembly ball (4)
and secure with cable sheathing connector (2).
2-195
TM 10-4320-344-24
NOTE