TM 10-4320-244-24
2.16.26 Manual Throttle Control Cable Maintenance, Model 609-C.
This task covers:
2.16.26.1 Removal
2.16.26.3 Installation
2 .
1
6 .2 6 . 2 R e p a ir
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section III,
Item 1
Material/Parts
Lock Washers (TM 10-4320-344-24P)
Equipment Conditions
Pumping station shut down, TM 10-4320-
344-10.
Equipment Conditions (Continued)
Battery disconnected, paragraph 2.15.3.
General Safety Instructions
Do not work on equipment that is not
securely stabilized to prevent rolling or
s l i d i n g.
Do not work on equipment without following
standard shop safety precautions.
2.16.26.1 Removal.
a.
b.
c .
d.
e .
f .
g .
Open rightside engine access door (Figure 2-77, 1), remove nut (2), lock
washer (3), and remove manual throttle control cable (4) from fuel injection
pump throttle lever (5).
Loosen two nuts (6 and 7) and remove manual throttle control cable (4) from
bracket assembly (8).
Remove manual throttle control cable (4) from all cable ties (9).
Loosen nut (10) and remove elbow (11) from manual throttle control cable (4).
Remove three nuts (6, 7, and
t h r o t t l e c o n t r o l c a b l e ( 4 ).
Remove nut (13), lock washer
pumping assembly (15).
Remove two screws (16), lock
from pumping assembly (15). Discard lock washers (17).
2.16.26.2 Repair.
10) and two lock washers (12) from manual
(14), and manual throttle control cable (4) from
washers (17), flat washers (18), and bracket (8)
a .
Inspect manual throttle control cable (4) for broken or damaged cable.
b .
Inspect bracket assembly (8) for bends, cracks, or damage.
c .
Inspect all mounting hardware for damage.
d.
Replace all defective components.
2.16.26.3 Installation.
a .
Position bracket assembly (8) on pumping assembly (15) and secure with two
flat washers (18), new lock washers (17), and screws (16).
b .
Install manual throttle control cable (4) in pumping assembly (15) and secure
with lock washer (14) and nut (13).
c .
Install three nuts (6, 7, and 10) and two lock washers (12) on manual throttle
c o n t r o l c a b l e ( 4 ).
2-196
