2.14.5 Air Intake Pipe Assembly Maintenance, Model US636HCCD-1.

Figure 2-35. Air Intake Hose Maintanence, Model 609-C

Figure 2-36. Air Intake Pipe Assembly Maintenance.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
115

TM 10-4320-344-24 2.14.5 Air Intake Pipe Assembly Maintenance, Model US636HCCD-1. This task covers: 2.14.5.1 Removal 2 . 14 . 5 . 4 R e p a ir 2.14.5.2 Disassembly 2.14.5.5 Assembly 2 . 14 . 5 . 3 I n s p e c t i on 2 . 14 . 5 . 6 I n s t a l l a t i on INITIAL SETUP Tools General Safety Instructions General Mechanic’s Automotive To prevent rolling or sliding, do not work Tool Kit, Appendix B, Section on equipment that is not securely III, Item 1 s t a b i l i z e d. Equipment Conditions Do not work on equipment without following standard shop safety precautions. Pumping station shut down, TM 10-4320-344-10. 2.14.5.1 Removal. a . Loosen hose clamps (Figure 2-36, 1 and 2). b . Remove air intake pipe assembly (3) from air cleaner assembly (4) and turbocharger (5). 2.14.5.2 Disassembly. a . Remove hose clamps (1 and 2). b . Loosen hose clamps (6 and 7) and slide hose clamps (6 and 7) over pipe elbow (8). c . Remove preformed hoses (9 and 10) from pipe elbow (8). d . Remove hose clamps (6 and 7) from pipe elbow (8). 2.14.5.3 Inspection. a . Inspect pipe elbow (8), preformed hoses (9 and 10) for deterioration and damage. b . Inspect hose clamps (1, 2, 6, and 7) for damage or missing components. 2.14.5.4 Repair. Replace all defective components. 2.14.5.5 Assembly. a . Slide hose clamps (6 and 7) over pipe elbow (8). b . Slide preformed hoses (9 and 10) over pipe elbow (8) and secure with hose clamps (6 and 7). c . Slide hose clamps (1 and 2) on preformed hoses (9 and 10). 2.14.5.6 Installation. Slide preformed hose (9) over air cleaner assembly (4) and preformed hose (10) over turbocharger (5) securing with hose clamps (1 and 2). 2-104

Privacy Statement
Press Release
Contact