TM 10-4320-344-10
Figure 2-19.
Model 609-A Controls Used for Manual Operation.
To avoid
standing
WARNING
hearing loss, hearing protection must be worn by personnel
within 50 feet of operating pumping assembly.
CAUTION
To prevent damage to starter, allow 3 minutes between start attempts.
Engine alarm will sound if engine does not start within 30 seconds after
ENGINE SWITCH is set to START position.
e .
Push ENGINE SWITCH ( 5 ) to START position and hold for no more than 30
seconds or until engine starts.
When engine starts,
(5) .
release ENGINE SWITCH
Engine will run at idle speed (1,000 revolutions per minute (rpm)).
If engine alarm sounds:
(1) Set ENGINE SWITCH (5) to OFF position.
(2) Reset engine alarm by pushing ENGINE ALARM reset button (2) .
(3) Wait 3 minutes, then repeat step e.
2-89
NOTE
