TM 10-4320-325-14
Table 4-4. Unit Troubleshooting Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
RECOIL STARTER ROPE DOES NOT REWIND
Step 1.
Visually check if rope and mechanism are binding.
Replace starter rope of recoil starter (para 4-28).
5.
ENGINE CRANKSHAFT DOES NOT TURN AS ROPE IS PULLED
Step 1.
Remove recoil starter and inspect cam.
Replace recoil starter (para 4-28).
Section V. UNIT MAINTENANCE PROCEDURES
4-10. INTRODUCTION.
Maintenance procedures at Unit level of maintenance include as necessary: removal, cleaning and
inspection, repair or replacement, and installation. Unless the procedure requires special resources or
tools, more than one maintenance person or specific equipment conditions, these are not listed for each
maintenance procedures. They are listed only for those procedures that require them.
