TM 10-4320-315-24
2-29. MAINTENANCE OF CONTROL PANEL WIRE HARNESS - (Cont)
(4)
Remove harness (2) through conduit (3) of control panel.
(5)
Tag and disconnect wiring harness from control panel components. (See Figure 2-1, Sheets 1 and 2)
b.
INSTALL.
(1)
Connect wiring harness (2) to control panel components (see Figure 2-1, Sheets 1 and 2). Remove tags.
(2)
Feed connectors P1 and P9 from front panel through conduit (3) toward pump side. Connect to mating
connectors J1 and J9.
(3)
Adjust wiring for best fit.
(4)
Close control panel door (1).
c.
REPAIR.
Repair of wiring harness consists of replacing damaged terminals, pins, and connectors. Refer to TM 43-0158.
2-50
