TM 10-4320-315-24
2-29. MAINTENANCE OF CONTROL PANEL WIRE HARNESS
This task covers:
a.
Remove
b.
Install
c.
Repair
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Pumping assembly is shutdown (refer to TM 10-4320-
(Item 1, Appendix B)
315-10).
Battery assembly is disconnected (para. 2-16).
Materials/Parts
References
Tags (Item 21, Appendix C)
Tool Kit, Electric Connector
TM 43-0158
(Item 5, Appendix B)
a.
REMOVE. (Figure 2-16)
(1)
Gain access through engine maintenance access door. Tag and disconnect P1 and P9 from J1 and J9
behind control panel. Remove damps.
(2)
Swing open control panel door (1).
(3)
If harness is to be reused, make sure every terminal is identified with connection points before removal.
As required, tag untagged connectors.
Figure 2-16. Control Panel Wiring Harness
2-49
