TM 10-4320-315-24
2-28. MAINTENANCE OF ENGINE PROTECTION SYSTEM MODULE
This task covers:
a.
INSERT FUNCTION
b.
INSERT FUNCTION
c.
INSERT FUNCTION
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Pumping assembly is shutdown (refer to TM 10-4320-
(Item 1, Appendix B)
315-10).
Battery assembly is disconnected (para. 2-16).
Materials/Parts
Tags (Item 21, Appendix C)
a.
REMOVE. (Figure 2-15)
(1)
Open control panel door (1).
(2)
Tag wires as necessary and disconnect from module (Figure 2-1, Sheet 1).
(3)
Remove screw (2), lockwasher (3), and ground wire (4). Tag ground wire (4).
(4)
Remove screws (5), lockwashers (6), and module (7).
Figure 2-15. Engine Protection System Module
2-47
