2-50. MAINTENANCE OF FUEL INJECTORS

MAINTENANCE OF FUEL INJECTION LINES - (Cont)

TM-10-4320-315-24 Pumping Assembly Water 600 GPM Trailer Mounted (NSN 4320-01-31448844) Manual
Page Navigation
98

TM 10-4320-315-24 2-50. MAINTENANCE OF FUEL INJECTORS This task covers: a. Remove b. Install INITIAL SETUP: Tools Equipment Conditions General Mechanics Tool Kit Pumping assembly is shutdown (refer to TM 10- 4320- (Item 1, Appendix B) 315-10). Removal Tool 150800, Fuel Injector Battery assembly is disconnected (para. 2-16). (Item 6, Appendix B) Fuel injection lines removed (para. 2-49). Removal Tool 110030, Fuel Injector (Item 7, Appendix B) a. REMOVE. (Figure 2-38) (1) Disconnect leak off lines (1) from injectors (6) by removing banjo bolts (2) and seal washers (3). (2) Remove nut (4) and clamping bridge (5) holding each of the six injectors (6). (3) Using tools 150800 and 110030, remove all injectors (6). (4) Plug all injector openings. Figure 2-38. Fuel Injectors 2-96

Privacy Statement
Press Release
Contact