TM 10-4320-315-24
2-49. MAINTENANCE OF FUEL INJECTION LINES - (Cont)
Figure 2-36. Fuel Injector Lines
(b) Unlatch and remove air cowling.
NOTE
Cap or plug fuel line and fitting when disconnected.
(c) Disconnect fuel injection line nut (1) from fitting on fuel injection pump (2).
(d) Disconnect fuel injection line nut (3) from fuel injector (4).
(e) Disconnect fuel leak off line at injector (4) by removing banjo bolt and seals.
(f) Remove bolt (5), nut (7), and lockwasher (6) that secure each line clamp (8) to fuel injection lines.
(g) Push grommet (9) from its slot on cowling mounting plate (10).
(h) Feed fuel injection line (11) through the slot on the cowling mounting plate (10) and remove from engine.
(i) If necessary, remove grommet (9) from fuel injection line (11).
2-93
