TM 10-4320-315-24
2-49. MAINTENANCE OF FUEL INJECTION LINES - (Cont)
Figure 2-37. Fuel Injector Line
b. INSTALL.
(1)
If fuel injection lines were removed with cowling mounting plate, install all six fuel injection lines as follows
(Figure 2-36):
(a) Position air cowling plate (9) with fuel injection lines (14) on engine.
(b) Install two flat washers (13), lockwashers (12), and bolts (11) on each side of the six injectors (4) that
secure cowling mounting plate (9).
(c) Install bolt (8), flat washer (7), flat washer (6), and nut (5) that secure cowling mounting plate (9) to air
duct front wall (10).
(d) Connect but do not tighten fuel injection line nuts (3) to each of the six fuel injectors (4).
(e) Connect each of the six fuel injection line nuts (1) to the fuel injection pump (2).
2-94
