TM 10-4320-315-242-52. MAINTENANCE OF ALTERNATORThis task covers: a.Removeb.InstallINITIAL SETUP:ToolsEquipmentConditionsGeneral Mechanics Tool KitPumping assembly is shutdown (refer to TM 10-4320-(Item 1, Appendix B)315-10).Battery assembly is disconnected (para. 2-16).Materials/PartsV-belt is removed (para. 2-41).Tags (Item 20, Appendix C)a. REMOVE. (Figure 2-40)(1)Tag and disconnect wiring to alternator (12).(2)Remove bolt (1), flat washer (2), nut (3), plate (4), and spacer (5) that secure bracket (6) to alternator (12).(3)Remove bolt (7), flat washer (8), spacer (9), and bracket (6).(4)Remove bolt (10) and nut (11) that secure alternator (12) to bracket (13).(5)Remove bolt (14), nut (15), spacer (16), and flat washer (17) that secure bracket (13) to front cover (18).(6)Remove bolt (19), spacer (20), and bracket (13).b. INSTALL.(1)Install bottom of bracket (13) to front cover (18) with bolt (19) and spacer (20).(2)Secure top of bracket (13) to front cover (18) with bolt (14), spacer (16), flat washer (17), and nut (15).(3)Install bracket (6) to front cover (18) with spacer (9), flat washer (8), and bolt (7).(4)Install alternator (12) on bracket (13) with bolt (10) and nut (11).(5)Secure alternator (12) to bracket (6) with bolt (1), flat washer (2), spacer (5), plate (4), and nut (3).(6)Connect wiring to alternator (7). Remove tags.2-100
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business