TM 10-4320-315-24
2-53. MAINTENANCE OF STARTER ASSEMBLY
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Pumping assembly is shutdown (refer to TM 10-432(
(Item 1, Appendix B)
315-10).
Torque Wrench (Item 2, Appendix B)
Battery is disconnected (para. 2-16).
Materials/Parts
Tags (Item 21, Appendix C)
Lockwashers (TM 10-4320-315-24P)
a. REMOVE. (Figure 2-41)
(1)
Tag and disconnect wires to starter.
(2)
Remove lower bolt (1), lockwasher (2), and wiring bundle (3).
(3)
Hold starter in place. Remove two bolts (4), lockwashers (5),and starter (6).
Figure 2-41. Starter Assembly
2-102
