TM 10-4320-307-24
3-36
CYLINDER HEAD ASSEMBLY/INSPECT/ REPLACE.
This task covers: a. Removal b. Cleaning/Inspection c. Installation
INITIAL SETUP
Tools
Equipment
Tool kit, general mechanic's (Item 1, Appendix B)
Condition
Razor blade scraper
Reference
Condition Description
Torque wrench adapter (Item 38, Appendix B)
Paragraph
Cooling system drained
Torque wrench (Item 2, Appendix B)
2-35
Materials/Parts
Paragraph
Aftercooler assembly
2-47
removed
Gasket, cylinder head
2-47
removed
Gasket, cylinder head
Paragraph
Rocker housing covers
Dry cleaning solvent (Item 30, Appendix C)
Paragraph
removed
Lubricating oil (Item 22, Appendix C)
Paragraph
Turbochargers removed
Fuel crossover 0-rings
2-40
Lint-free rags (Item 19, Appendix C)
Paragraph
Exhaust manifold removed
Suitable wooden blocks
2-46
Wire brush
Paragraph
Water manifold removed
Personnel Required
2-45
Two
Paragraph
Rocker lever housing
3-33
removed
Manual References
Paragraph
Injectors removed
TM 10-4320-307-10
3-35
General Safety Instructions
Well ventilated area
REMOVAL:
1.
Remove valve crossheads.
2.
Remove fuel supply and fuel drain tubes.
3.
Remove all necessary brackets and clamps.
4.
Remove two fuel crossover connections (1) and
O-rings (2) by removing capscrews and
lockwashers (3).
3-130
