TM 10-4320-307-24
3-34 CAM FOLLOWER INSPECT/REPAIR/REPLACE (CONT).
5.
Install pushrods as follows:
a.
Lubricate ball end of pushrods with clean oil.
NOTE
The injector pushrods are larger in diameter than the valve pushrods.
The crankshaft must be rotated clockwise to install all the pushrods.
b.
Install pushrods in the corresponding numbered location.
c.
Position pushrods under rocker lever adjusting screws.
d. Tighten adjusting screws enough to hold pushrods in position.
6.
Adjust injector valves in accordance with paragraph 3-35.
7.
Adjust intake and exhaust valves in accordance with paragraph 2-54.
8.
Install accessory drive assembly in accordance with paragraph 3-30.
9.
Install fuel pump assembly in accordance with paragraph 3-29.
10.
Install rocker housing covers in accordance with paragraph 2-53.
11.
Install crossover connections in accordance with paragraph 2-47.
3-127