TM 10-4320-307-24
3-35
INJECTORS INSPECT/REPLACE(CONT).
INSTALLATION:
1.
Position injector (1) in cylinder head (2).
2.
Install capscrew (3), washer (4), and injector
clamp (5) securing injector (1) to cylinder head
(2).
3.
Move pushrod under rocker lever (6).
4.
Perform injector rocker lever adjustment
procedures in accordance with paragraph 2-54.
5.
Install rocker lever cover assembly in accordance
with paragraph 2-53.
OPERATIONAL CHECK:
Touching exhaust system during test can cause severe burns.
CARBON MONOXIDE (EXHAUST GAS) CAN KILL YOU
Exposure to exhaust gases produces symptoms of headache, dizziness, loss of muscular control,
drowsiness, or coma. Brain damage or death can result from severe exposure.
Fumes from engine become concentrated with poor ventilation. Operate engine in a ventilated area
only.
While running engine, be alert for fumes. If someone is overcome, expose to fresh air; keep warm
and still; give artificial respiration if needed. Seek medical attention. Administer oxygen, if available.
GOOD VENTILATION IS THE BEST DEFENSE AGAINST EXHAUST POISONING.
1.
Start engine in accordance with TM 10-4320-307-10.
2.
Check engine for smooth engine operation.
3-129
