TM 10-4320-307-24
3-35
INJECTORS INSPECT/REPLACE.
This task covers: a. Removal b. Inspection c. Installation d. Operational Test
INITIAL SETUP
Tools
Equipment
Tool kit, general mechanic's (Item 1, Appendix B)
Condition
Manual References
Reference
Condition Description
TM 10-4320-307-10
Paragraph
Rocker lever cover
2-53
assembly removed
General Safety Instructions
Well ventilated area required for operational check.
REMOVAL:
1.
Loosen adjusting screw locknut (1) on each
injector rocker lever (2).
2.
Turn out adjusting screw (3) on each injector
rocker lever (2) and move pushrod to the side.
3.
Rotate each rocker lever (2) up on each cylinder.
4.
Remove capscrew (4), washer (5), and injection
clamp (6) securing injector (7) to cylinder head
(8).
5.
Remove injector (7).
INSPECTION:
1.
Check injector cup tip for clogged holes.
2.
Check for excessive carbon buildup in injector cup
hole.
NOTE
Notify
general
support
maintenance
if
injectors require cleaning or any further
maintenance.
3-128