TM5-4930-230-13
Table 4-1. Organizational Preventive Maintenance Checks and Services Monthly Schedule.
Item
No.
1
2
3
4
5
Item
To Be
Inspected
HOSES, NOZ-
ZLES, AND
REELS
STATIC
DISCHARGE
CABLE AND
REEL
ASSEMBLY
FILTER/
SEPARATOR
PRESSURE
VENT VALVE
MANIFOLD
Procedures
Check for and have Repaired,
Replaced, Adjusted as necessary
Inspect hoses for leaks, breaks, cuts, and
worn areas, Replace damaged hose. Inspect
nozzles for corrosion, and leaks. Repair
corroded or leaking nozzles. Inspect reels
for ease of operation. Replace defective reel.
Inspect cable and clamp for worn, frayed, or
corroded condition. Inspect reel for ease of
operation. Repair or replace a defective
reel assembly.
Inspect for leaks, cracks and other damage.
Inspect for leaking, damaged, or dirty sight
gage. Check differential pressure gage dur-
ing operations. If reading on gage shows
other than green replace filter elements.
Replace defective parts.
CAUTION
In freezing weather, ensure pres-
sure vent valve is protected by
being located under Fill Plug
Hinge .
While pumping operation
is in process blockage of this
vent system (e.g. , with ice) can
cause the aluminum tanks to
either collapse or rupture.
Inspect the pressure vent valve for dirt or
damage. Clean or replace a dirty or damaged
pressure vent valve. Inspect O-ring for
damage.
Inspect for worn or broken gaskets and
damaged sealing surfaces. Replace defec-
tive manifold. Replace defective gasket
For Readiness Reporting,
Equipment is Not Ready/
Available If:
violence of fuel leaking
from hoses or nozzle
Both nozzles are inoperative
Item missing or defective.
preventing proper grounding
during operation, or re-
fueling.
Evidence of fuel leaking
Evidence of fuel leaking
from valve or gasket
Fuel leaking from defective
manifold or gasket.
4-6 Change 9
