TM5-4930-230-13
Table 4-2. Organizational Maintenance Troubleshooting.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
FILTER/SEPARATOR LEAKS FUEL.
Step 1.
Check filter/separator at top for leaks.
Replace cover gasket. (Paragraph 4-15.)
Step 2. Check filter/separator for other leaks.
If other leaks are found, refer to paragraph 4-15.
2. PRODUCT DISCHARGE IS DIRTY.
Check for loose or dirty filter elements.
Reseat or replace filter elements. (Paragraph 4-14.)
3. PRODUCT FLOW SLOWS DURING OPERATION.
Step 1.
Inspect for kinked or leaking hose or connection.
Disconnect hoses and inspect and replace gaskets as necessary. Replace any kinked
hoses. Refer to paragraphs 4-10a and 4-10C.
Step 2.
Inspect for defective nozzle.
Repair a defective nozzle in accordance with paragraph 4-18.
4. GAS
Step 3.
Inspect for dirty filter/separator elements.
Replace filter/separator elements. (Paragraph 4-14.)
ENGINE WILL NOT OPERATE.
Refer to TM 5-2805-257-14 Troubleshooting Guide.
WARNING
Disconnect Intervehicle Power Cable from vehicle
replacing electrical components.
before maintaining or
4-9
