TM5-4930-230-13
Figure 2-3. Adapter Probe, Water Detector Kit.
(b) Connect ON-OFF switch cable to junction box receptacle J1 (figure 2-1).
(c) Ground the unit by attaching clip of static discharge securely to a ground point.
NOTE
If ground is not present, use 3 Section Ground Rod, App B, Sec Ill; and
Slide Hammer Kit, Add Auth List.
(d) Check truck hand throttle for proper engine RPM to maintain adequate charge rate during
pumping operation.
(e) Pull out dispensing hoses to desired length. Attach nozzle bonding wires to aircraft or vehi-
cle before opening filler caps and inserting nozzles.
2-10