TM 5-4320-302-14
6-19. CRANKSHAFT (CONT)
Location/Item
Action
Remarks
21. Valve cams
Replace camshaft if any inlet or exhaust valve
on camshaft
cam lobe height is outside specified limits.
Repair only minor nicks, burrs, or worn spots
with MIL-S-17243 surfacing stone or P-C-458
crocus cloth. Repair only if repairs will not
cause the tolerance limits to be exceeded.
22. Washer
Replace if excessively worn, bent, cracked, or
otherwise damaged. Do not repair washer.
INSTALLATION
23. Camshaft,
Lubricate with MIL-L-2104 lubricating oil and
washer, and
install in crankcase. If tappets are already
bearing bush
installed in crankcase, make sure they are in
top dead center position.
6-165
