TM 5-4320-302-14
6-19 CRANKSHAFT (CONT)
Location/Item
Action
Remarks
again to check that the clearance is within
specified limits. Install new dished plug with
camshaft plug installer No. 143600.
13. Inlet and
Measure height of cam lobe from shaft to top
exhaust cam
of lobe. Height should be 0.3110 to 0.3189
lobe height
inch (7.90 to 8.10 mm). If cam lobes are
damaged or worn, and do not measure within
the specified limits, replace camshaft. Minor
nicks, burrs, or wear may be smoothed out
with a MIL-S-17243 surfacing stone or P-C-
458 crocus cloth. Reclean camshaft as de-
scribed in step 2.
6-162
