TM 5-4320-300-14
4-13. AIR CLEANER ASSEMBLY (CONT)
Location/Item
Action
Remarks
2.
Elbow
Loosen lower clamp. Remove elbow.
3.
Restriction
Remove hose from elbow below panel and from
indicator
elbow in air inlet housing. Remove elbow from
nipple extending through panel bottom. Remove
washer, restriction indicator with assembled
nipple, and washer. Remove nipple and washer
from base of indicator. Remove elbow from air
inlet housing.
4.
Mounting bands Remove screws. Remove bands.
INSTALLATION/REPLACEMENT
5.
Mounting bands
Place bands in position, with clamps towards air
inlet side of engine. Install screws and tighten
securely.
4-82