Organizational Preventive Maintenance Checks and Services - Continued

Organizational Preventive Maintenance Checks and Services - Continued - TM-5-4320-300-14_130

Organizational Preventive Maintenance Checks and Services - Continued - TM-5-4320-300-14_132

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
124

TM 5-4320-300-14 Table 4-1 Organizational Preventive Maintenance Checks and Services - Continued W -Weekly Q- Quarterly M -Monthly S- Semiannually Interval Item Item To Be No. W M Q S Inspected Procedures 15 Fuel Control Remove valve cover Tube mounting bolts and valve cover. Examine the fuel control tube, control lever, rack control lever, and brackets for exces- sive wear, cracks, or other damage. Examine the return springs for wear or fracture. If the components are worn, fractured, cracked, or other- wise damaged, notify direct sup- port maintenance. Replace valve cover and mounting bolts. Tighten securely. 16 · Cooling System To flush the system proceed as follows: WARNING Hot coolant may be released when radiator cap is removed. Allow engine to cool before removing cap. Open cap part way to ensure that pressure in cooling system is released, then remove cap. a. Drain solution from radiator by remov- ing the radiator cap and opening the radiator draincock. Then drain the cylinder block by opening the drain- cock on the bottom of the oil cooler (behind fuel strainer). 4-28

Privacy Statement
Press Release
Contact