TM 5-4320-275-13 & P
GEAR REDUCER (CONT)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Cap screw
Use 15/16 inch socket and
on crank
handle to loosen cap screw
(7). Do not remove screw
from crank.
2. Cap screws
Use 15/16 inch socket and handle to remove cap
closest to
screws (4). Remove two cap screws (4) and lock-
crank
washers (5).
3. Cap screws
Use 15/16 inch wrench to hold nuts (2). Use
and nuts
15/16 inch socket and handle to remove cap
screws (1). Remove two cap screws (1), nuts
(2), and lockwashers (3).
4. Gear reducer
Slide gear reducer (6) away from crank.
NOTE
It may be necessary to open crank to release gear reducer shaft.
INSPECTION
5. Shaft
Check for input and output shaft rotation. If
either shaft binds or does not rotate, replace
gear reducer.
4-82
