TM 5-3825-270-23&P
FIELD MAINTENANCE
DISC MAGNET AND BRACKET REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool Kit, General Mechanic's: Automotive
Lockwasher (WP 0226, Table 1, Item 59) Qty: 3
(WP 0225, Table 1, Item 12)
Lockwasher (WP 0226, Table 1, Item 61) Qty: 2
Materials/Parts
References
Tags, Identification, White (WP 0224, Table 1, Item
Parts Manual (WP 0220) Figure 4008
54)
Equipment Condition
Cab control box faceguard removed. (WP 0205)
REMOVAL
NOTE
Both disc magnets are removed the same way. Right side disc magnet shown.
1.
Remove nut (Figure 1, Item 1), lockwasher (Figure 1, Item 2), screw (Figure 1, Item 5), and disc magnet (Figure
1, Item 4) from cab control mounting plate (Figure 1, Item 3). Discard lockwasher.
5
4
3
1, 2
4
Figure 1. Disc Magnet Removal.
2.
Remove two nuts (Figure 2, Item 9), lockwashers (Figure 2, Item 10), and screws (Figure 2, Item 6) from cab
control box (Figure 2, Item 8) and cab control mounting plate (Figure 2, Item 3). Discard lockwashers.
