TM 5-3825-270-23&P
0100
REMOVAL - Continued
22
23, 24, 25
4
Figure 9. Main Control Box Removal.
NOTE
Note position and location of terminal strips prior to removal to ensure proper installation.
Faceplate harness may remain on terminal strips when removing terminal strips from
main control box.
All terminal strips are removed from main control box the same way.
53.
Remove two nuts (Figure 10, Item 26), screws (Figure 10, Item 27), washers (Figure 10, Item 28), lockwashers
(Figure 9, Item 29), and positive terminal strip (Figure 10, Item 1) from main control box (Figure 10, Item 4).
Discard lockwashers.
2
3
4
1
10
10
10
26, 27, 28, 29
5
15
15
1
20
20
Figure 10. Main Control Box Removal.