TM 5-3825-270-23&P
0100
REMOVAL - Continued
15.
Remove white wire from positive terminal strip (Figure 1, Item 1) socket 10 and feed through bottom of panel.
NOTE
Perform Steps (16) through (19) for alternator wiring harness.
16.
Remove red wire from positive terminal strip (Figure 2, Item 1) socket 11 and feed through bottom of panel.
WIRE
7, 8, 9
1
3
10
10
10
WIRE
5
15
15
1
20
20
4
11
10
WIRE
Figure 2. Alternator Wire Harness Removal.
17.
Remove clear wire from interconnect terminal strip (Figure 2, Item 3) socket 17.
18.
Remove nut (Figure 2, Item 7), washer (Figure 2, Item 8), and black wire from screw (Figure 2, Item 9).
19.
Remove retaining nut (Figure 2, Item 11) and slightly lower alternator wiring harness (Figure 2, Item 10) from
main control box (Figure 2, Item 4).
NOTE
Perform Steps (20) through (37) for UPIK wire harness.
20.
Remove retaining nut (Figure 3, Item 13) and slightly lower UPIK wire harness (Figure 3, Item 12) from main
control box (Figure 3, Item 4).
