TM 5-3825-270-23&P
0095
INSTALLATION - Continued
NOTE
Install wires as noted prior to removal.
3.
Install red wire with white stripe (Figure 6, Item 8) on main control panel engine speed RPM switch (Figure 6,
Item 7).
7
6
10
9
8
Figure 6. Main Control Panel Engine Speed RPM Switch Installation.
4.
Install two red wires (Figure 6, Item 9) on main control panel engine speed RPM switch (Figure 6, Item 7).
5.
Install red wire with green stripe (Figure 6, Item 10) on main control panel engine speed RPM switch (Figure
6, Item 7).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
6.
Apply sealant to the threads of six screws (Figure 7, Item 3).