TM 5-3825-270-23&P
0096
INSTALLATION - Continued
NOTE
Install wires as noted prior to removal.
3.
Install red wire (Figure 6, Item 10) on main control panel engine speed set switch (Figure 6, Item 9) and tighten
screw (Figure 6, Item 11).
6
10, 11
9
7, 8
Figure 6. Main Control Panel Engine Speed Set Switch Installation.
4.
Install black wire with white stripe (Figure 6, Item 7) on main control panel engine speed set switch (Figure 6,
Item 9) and tighten screw (Figure 6, Item 8).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
5.
Apply sealant to the threads of six screws (Figure 7, Item 3).
5
6
3, 4
Figure 7. Main Control Panel Engine Speed Set Switch Installation.