TM 5-3825-270-23&P
0090
INSTALLATION - Continued
1.
Install main control panel oil pressure gauge (Figure 4, Item 8) and nut (Figure 4, Item 7) on control panel
(Figure 4, Item 6).
7
8
9
6
Figure 4. Main Control Panel Oil Pressure Gauge Installation.
NOTE
Install wires as noted prior to removal.
2.
Install wire connector (Figure 4, Item 9) on main control panel oil pressure gauge (Figure 4, Item 8).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
3.
Apply sealant to the threads of six screws (Figure 5, Item 3).
