• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5. Fuel System Components - Step 5.
Figure 7. Engine Injection Pump Banjo-Fitting - Step 7.

Field Maintenance Manual Tools List For Engineer Mission Module - Water Distributor Page Navigation
  39    40    41    42    43  44  45    46    47    48    49  
img
. .
TM 5-3825-270-23&P
0007
FLATRACK FUEL LINES
(WATER TANK NOT SHOWN FOR CLARITY)
Figure 6. Flatrack Fuel Lines - Step 6.
CONDITION/INDICATION
Are flatrack fuel lines free from damage and leakage?
DECISION
No - Replace flatrack fuel line(s). (WP 0172) Verify problem is solved. (Step 9 - Does engine start?)
Yes - Go to step 7. (Step 7 - Is fuel pressurized at fuel supply hose on engine injection pump?)
STEP 7
Is fuel pressurized at fuel supply hose on engine injection pump?
1.
Place container suitable for holding fuel beneath engine.
WARNING
Fuel is very flammable and can explode easily. Keep fuel away from open fire and keep
fire extinguisher within easy reach when working with fuel. Do not work on fuel system
when engine is hot. Fuel can be ignited when engine is hot. When working with fuel, post
signs that read NO SMOKING WITHIN 50 FEET OF VEHICLE. Failure to comply may
result in injury or death to personnel.
2.
Disconnect fuel supply hose from engine injection pump banjo-fitting.
0007-6


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.