TM 5-3825-270-10
OPERATOR MAINTENANCE
SERVICE UPON RECEIPT
INITIAL SETUP:
Not Applicable
UNPACKING AND DEPROCESSING
UNPACKING
Upon receipt of new equipment, the receiving organization must see if equipment has been properly prepared for
service and is in good condition. Inspect all assemblies, subassemblies, and accessories to be sure they are in
proper working order. Secure, clean, and correctly adjust and/or lubricate, as needed (see Field Level Preventive
Maintenance Checks and Services (PMCS) Tables and Operator's Preventive Maintenance Checks and Services
(PMCS) Tables (WP 0070)). Check all tools and equipment to be sure every item is there and in good condition and
END OF TASK
UNPACKING
WARNING
SOLVENT CLEANING COMPOUND (DRYCLEANING SOLVENT)
Solvent cleaning compound MIL-PRF-680 Type II and III may be irritating to the eyes and
skin. Use protective gloves and goggles. Use in a well-ventilated area. Use respirator as
needed. Accidental ingestion can cause irritation of digestive tract and respiratory tract,
may cause lung and central nervous system damage. Can be fatal if swallowed.
Inhalation of high/massive concentrations can cause coma or be fatal. First aid for
ingestion: do not induce vomiting. Seek immediate medical attention. First aid for skin
contact: remove contaminated clothing. Wash skin thoroughly with soap and water. If
symptoms persist, seek medical attention. First aid for eye contact: flush with water for
15 minutes or until irritation subsides. If symptoms persist, seek medical attention. First
aid for inhalation: move to fresh air. If not breathing, provide artificial respiration. If
symptoms persist, seek medical attention. Keep away from open flames and other
sources of ignition. Failure to comply may result in injury or death to personnel.
The flashpoint for Type II solvent cleaning compound is 141 to 198F (61 to 92C), and
Type III is 200 to 241F (93 to 116C).
Improper cleaning methods and use of unauthorized cleaning solvents may result in injury
to personnel and/or damage to equipment.
Fire extinguishers should be placed nearby when using solvent cleaning compound.
Failure to comply may result in injury or death to personnel.
0072-1