TM 5-3825-270-10
0016
DISCHARGE FROM SPRINKLER NOZZLES FROM PLATFORM - Continued
1
Figure 7. Discharge From Sprinkler Nozzles From Platform.
21.
Disconnect universal power interface kit (UPIK) (WP 0012).
END OF TASK
OPERATE SPRINKLERS FROM CAB OF PRIME MOVER
CAUTION
Disconnect UPIK harness as soon as mission is complete. Failure to comply may result
in damage to UPIK harness.
UPIK harness is to be connected only during operation of water distributor while on trailer
or vehicle. Driving over adverse conditions may result in damage to UPIK harness.
Do not operate prime mover in reverse with UPIK harness connected to trailer. Failure
to comply may result in damage to UPIK harness.
Do not allow engine pump run more than 5 minutes without circulating water through
pump. Failure to comply may result in damage to equipment.
NOTE
Before operating water distributor from cab of prime mover ensure that all necessary
switches on platform control panel are set to the "CAB CONTROL" position.
Ensure that emergency stop button is pulled out.
Ensure that there is enough product in water distributor to complete mission.
1.
Fill water distributor (WP 0011).
2.
Ensure UPIK and cab control box are properly connected (WP 0012).
3.
Open valve V1 (Figure 8, Item 1).