TM 5-3825-270-10
0016
DISCHARGE FROM SPRINKLER NOZZLES FROM PLATFORM - Continued
Do not allow engine pump run more than 5 minutes without circulating water through
pump. Failure to comply may result in damage to equipment.
8.
Start engine by pressing up and holding the engine start/stop switch (Figure 3, Item 4) until engine is started.
9.
Adjust engine rpm (Figure 3, Item 5) by pressing up or down on the rpm switch (Figure 3, Item 8).
CAUTION
Ensure that engine speed is more than 1,500 rpm. Failure to comply may result in damage
to equipment.
10.
When engine rpm (Figure 3, Item 5) is to desired setting press set switch (Figure 3, Item 7) to set rpm.
11.
Place RH sprinkler switch (Figure 4, Item 10) to the ON position.
9
10
Figure 4. Discharge From Sprinkler Nozzles From Platform.
12.
Place LH sprinkler switch (Figure 4, Item 9) to the ON position.
13.
Continue with mission as required.
14.
When mission is complete, place RH sprinkler switch (Figure 4, Item 10) to the OFF position.
15.
Place LH sprinkler switch (Figure 4, Item 9) to the OFF position.
CAUTION
Engine speed must be at idle speed before engine is shut down. Failure to comply may result
in damage to equipment.
16.
Press RESUME/IDLE switch (Figure 5, Item 11) to the IDLE position to return engine rpm (Figure 5, Item 5)
to idle speed.