TM 5-3825-270-10
FIELD MAINTENANCE
DISCHARGE FROM SPRINKLER NOZZLES
INITIAL SETUP:
Not Applicable
DISCHARGE FROM SPRINKLER NOZZLES FROM PLATFORM
1.
Mount water distributor on PLS truck or trailer. (TM 9-2320-364-10)
NOTE
Ensure that all valves and petcocks are in the closed position prior to performing this task.
For normal operating pressures, refer to WP0002, Table 1.
2.
Fill water distributor (WP 0011).
3.
Ensure that water pump is primed (WP 0019).
4.
Connect universal power interface kit (UPIK) (WP 0012).
5.
Open valve V1 (Figure 1, Item 1).
1
Figure 1. Discharge From Sprinkler Nozzles From Platform.
6.
Open control panel cover (Figure 2, Item 2) by releasing rubber t-handle (Figure 2, Item 3).