TM 5-3825-270-10
0010
PREPARATION FOR DUST CONTROL AGENT USE - Continued
18
17
19
21
20
Figure 7. Preparation For Dust Control Agent Use.
CAUTION
Release engine start/stop switch once engine is started. Failure to comply may result in
damage to equipment.
15.
Start engine by pressing up and holding the engine start/stop switch (Figure 7, Item 17) until engine is started.
16.
Adjust engine rpm (Figure 7, Item 18) to 1500 rpm by pressing up or down on the rpm switch (Figure 7, Item
21).
CAUTION
Ensure that engine speed is set to 1500 rpm. Failure to comply may result in damage to
equipment.
DO NOT allow engine to run longer than necessary to empty soil stabilization additive
into water tank. Soil stabilization additive will foam and cause expansion of product.
Failure to comply may result in damage to equipment.
17.
When engine rpm (Figure 7, Item 18) is to desired setting press set switch (Figure 7, Item 20) to set rpm .
18.
Slowly close valve V1 (Figure 8, Item 13).
