TM 5-3825-270-10
0010
PREPARATION FOR DUST CONTROL AGENT USE - Continued
17
Figure 12. Preparation For Dust Control Agent Use.
23.
Close valve (Figure 13, Item 22) on tote (Figure 13, Item 10).
10
8, 9
6
22
2
Figure 13. Preparation For Dust Control Agent Use.
24.
Disconnect 2" coupling cam (Figure 13, Item 8) from tote connection point (Figure 13, Item 9).
25.
Repeat Steps (7) through (24) for any additional totes (Figure 13, Item 10) of soil stabilization additive required
for intended load.
26.
Disconnect suction hose (Figure 13, Item 2) from 3" coupling cam (Figure 13, Item 6) on tote (Figure 13, Item
10).
27.
Fill water distributor with remaining half of water required for intended dilution ratio and total load. It is
recommended to use either the system pump (WP 0020) or external pump (WP 0021) when performing this
task.
28.
Disconnect suction hose (Figure 14, Item 2) from connection point C1 (Figure 14, Item 1).