TM 5-3820-276-10-2
0219
HYDRAULIC OIL RESERVOIR SERVICING - WWDR - Continued
2
3
1
4
WWDS00619
Figure 1.
WWDR Hydraulic Oil Reservoir.
3.
Clean area around hydraulic oil reservoir fill cap(s) (Figure 1, Item 1) with cleaning cloth.
4.
Remove hydraulic oil reservoir cap (Figure 1, Item 1) from hydraulic oil reservoir (Figure 1, Item 4).
5.
Add hydraulic oil to hydraulic oil reservoir (Figure 1, Item 4) using suitable container.
6.
Make sure hydraulic oil is at LEVEL OF COLD OIL mark on hydraulic oil reservoir label (Figure 1, Item 2),
as seen through reservoir sight gauge (Figure 1, Item 3).
7.
Install hydraulic oil reservoir cap (Figure 1, Item 1) on hydraulic oil reservoir (Figure 1, Item 4).
8.
Clean any spilled hydraulic oil from hydraulic oil reservoir cap(s) (Figure 1, Item 1) and hydraulic oil reservoir
(Figure 1, Item 4) with cleaning cloth.
9.
Close left-side catwalk (Volume 1, WP 0029).
END OF TASK
HYDRAULIC OIL RESERVOIR SERVICING - WWSV
1.
Lower rear work platform (Volume 1, WP 0032).
2.
Lower right-side catwalk (Volume 1, WP 0032).
02/13/2013root(gen.maintwp)wpno(M00006)
